| Code | Message | What it means |
|---|---|---|
| E102 | Heater on without request | The convection heater kept drawing current after it was told to switch off. A stuck relay or control fault. |
| E103 | Ambient overheat | It is over 158°F (70°C) inside the oven's electronics compartment. Usually a clogged air filter or blocked vents. |
| E104 | Overheat stats released | A cavity or magnetron thermal cut-out has opened. |
| E105 | Supply frequency out of range | The power supply frequency is outside what the oven accepts. |
| E106 | Cavity overheated | The cavity ran more than 77°F (25°C) above the set temperature while cooking. |
| E107 | Comm error | The touch screen and the main relay board stopped talking to each other. |
What you can check yourself
E103
is the one you can often fix yourself. The message literally tells you to remove, clean and replace the air filter. Do that, and make sure the oven has space around it to breathe.
For anything else, note the code and call.
When to call
E102, E104, E106 and E107 need a technician. E104 in particular means a safety cut-out has done its job, and the reason it tripped has to be found before the oven goes back into service.
with the model and the code.